1 / 1
ESP32, 4x12 LCD and mini breadboard wallmount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used it to build a simple VOC monitor, could be used for many different projects though.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used it to build a simple VOC monitor, could be used for many different projects though.
Print with the back on the buildplate. I printed it in PLA and it has been working fine in my walk in closet print farm for almost a year. ABS is always better though.
I also added some dovetail mounts if you don't want to screw it to the wall, they are designed to be glued to the rear of the main model with CA glue or whatever kind of glue you prefer, then stick the other side to the wall with command strips.