Prusa MK3 filament sensor cover with magnetic coupling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variant of the version by @Minimayhem that does not require supports, available for both 5mm and 3mm tall magnets
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Minimayhems filament sensor cover with the magnetic coupling design by Line Arc Line.
This design uses 5mm diameter magnets, there are two versions of the design, one for 5mm tall magnets and one for 3mm tall magnets. Each variant is kept in the appropriately marked folder. Please double check which one you need before you start printing!
The components should be printed in the orientation shown in the image, for reference this is the same orientation that the stock filament sensor cover is printed in.