Cap for HobbyPark Driver / Screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple end cap for hollow aluminum handle drivers/screwdrivers. Also useful to color code drivers.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I purchased a set of the very common allen wrench/hex key drivers on Amazon and was shocked they didn't come with caps on the ends. Leaving them hollow was driving me crazy. This is just a simple cap to help keep me sane. It is also useful to color code the drivers.
I used rubber O-rings that I had on hand to secure the cap in a non-permanent manner. O-ring dimensions are 3/32" wide, 3/8" ID. Depending on which of the drivers you have, OD is 9/16" or slightly smaller.
Print top of cap down. No need for supports.
I've used these on three different sets of drivers with success. The HobbyPark drivers that I originally purchased are linked below.