BOSCH GLM 80 Fastening replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The needle like structure found on the back of the BOSCH GLM 80 broke i decided to make a 3d printed part of it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
The needle like structure found on the back of the GLM 80 broke i decided to make a 3d printed part of it. although I did print on a 0.6 nozzle, going with a smaller nozzle can help. printed on PLA.
The part is of similar size and works well
make sure the hole for the screw to go through is enlarged a bit with a 2mm drill if possible.
clean a little bit of excess on the dents around the circular part.
Support are needed for the circular section however try experimenting without it. Support of buildplate only.