BOSCH GLM 80 Fastening replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The needle like structure found on the back of the BOSCH GLM 80 broke i decided to make a 3d printed part of it.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
The needle like structure found on the back of the GLM 80 broke i decided to make a 3d printed part of it. although I did print on a 0.6 nozzle, going with a smaller nozzle can help. printed on PLA.
The part is of similar size and works well
make sure the hole for the screw to go through is enlarged a bit with a 2mm drill if possible.
clean a little bit of excess on the dents around the circular part.
Support are needed for the circular section however try experimenting without it. Support of buildplate only.