Cervelo S3 Garmin Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Garmin Mount for the Cervelo S3 with special Stem mounting slot
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 277
- Wydruki
- 1
- Wyświetlenia
- 2190
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A print for the Cervelo S3 Specific Garmin mount. Printed in ABS with a 30% infill. Uses a small threaded brass insert that should be inserted using a soldering iron for best results. Please use thread locker on the single M3 bolt.
Safety Warning
Make sure the T-piece (stem side bracket) is sub flush to the stem bracket using a straight edge and adjust the print or file away material until it is 100% perfect. If your printer is accurate then this print should be ok but please check. If the print is higher than the bracket it could/will crack your carbon bars which would be dangerous!
Also make sure that the M3 bolt you us is not so long it pushes through the T-piece and into your carbon bars. This will crack your bars which would be dangerous!