Cervelo S3 Garmin Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Garmin Mount for the Cervelo S3 with special Stem mounting slot
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 277
- Makes
- 1
- Views
- 2,190
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A print for the Cervelo S3 Specific Garmin mount. Printed in ABS with a 30% infill. Uses a small threaded brass insert that should be inserted using a soldering iron for best results. Please use thread locker on the single M3 bolt.
Safety Warning
Make sure the T-piece (stem side bracket) is sub flush to the stem bracket using a straight edge and adjust the print or file away material until it is 100% perfect. If your printer is accurate then this print should be ok but please check. If the print is higher than the bracket it could/will crack your carbon bars which would be dangerous!
Also make sure that the M3 bolt you us is not so long it pushes through the T-piece and into your carbon bars. This will crack your bars which would be dangerous!