Blind Valence Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the clips that clip the top valence onto the blind rail. They fit a 62.5mm (2.5") valence. (see pictures).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I have some wooden Hunter Douglas blinds on my windows. I found the small plastic clips that hold the valence on the top break after a while. These new clips are stronger, fit perfectly, and just clip in.
These clips fit a 62mm (2.5 inch) valence that has a groove in the middle of the back. I posted some closeup picture of the valence so you can see if it matches what you have. I have seen these valences on a number of different brand of blinds.
I used the following when printing:
- 0.15 layer height
- 2 Perimeters
- 15% infill
- No support required
If you have blinds with a similar valence, give these a try. Sooner or later, you might need them.
I included two gcode file, one that prints just a single clip and one that prints 3 clips. I also included the Fusion360 file just incase it's not perfect and you want to make some changes. If you do change it, then please send me a comment and let me know how you improved it.