Blind Valence Clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the clips that clip the top valence onto the blind rail. They fit a 62.5mm (2.5") valence. (see pictures).
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I have some wooden Hunter Douglas blinds on my windows. I found the small plastic clips that hold the valence on the top break after a while. These new clips are stronger, fit perfectly, and just clip in.
These clips fit a 62mm (2.5 inch) valence that has a groove in the middle of the back. I posted some closeup picture of the valence so you can see if it matches what you have. I have seen these valences on a number of different brand of blinds.
I used the following when printing:
- 0.15 layer height
- 2 Perimeters
- 15% infill
- No support required
If you have blinds with a similar valence, give these a try. Sooner or later, you might need them.
I included two gcode file, one that prints just a single clip and one that prints 3 clips. I also included the Fusion360 file just incase it's not perfect and you want to make some changes. If you do change it, then please send me a comment and let me know how you improved it.