Zipper Pull - Pac Man
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boring zippers no more! Expanding the Zipper Pull collection - introducing the iconic Pac-Man! 😁
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 145
- Wydruki
- 2
- Wyświetlenia
- 1137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Items you need:
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- Super glue (for components and magnets).
*If you do not have magnets, I have included a 3D printed Connector.
Suggested print settings:
- Layer height 0.2mm.
- Infill 30% - Main Body.
- Infill 15% - Eyes & Mouth.
- Position the print in a way that the joining face is facing downwards.
- No supports are needed.
Changelog
- 2 Jan 2024: Version 2 - Fine-tuned the magnet inset cavities. No changes to the print orientation or support settings.
For more interesting zipper pull charms, be sure to track this tag (Zipperrific).
We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals! 🌟
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.