SpaceX Landing Pad Qi Wireless Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,74 € – 2,12 € netto (bez VAT)
Dla pliku: spacex-wireless-charger-bottom_02mm_pla_mk3_1h5.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,93 € netto (środek widełek).
- Masa podana przez autora
- 25 g
- Czas druku podany przez autora
- 1,89 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Does what it says on the tin. Fast wireless charging (Max 10W). Can print with or without MMU.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 2160
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Does what it says on the tin. Fast wireless charging (Max 10W). Can print with or without MMU. No electrical knowledge or soldering needed. Screwless design, just glue in the PCB and coil, the 2 halves snap fit together. Works on any Qi compliant device. I've used it on an iPhone 8 and my Samsung Galaxy S9. My S9 it takes 3.5 hours to fully charge.
Print instructions
The gcode and 3mf files I've uploaded aren't set up for the MMU. If you have an MMU you will need to slice it yourself. You can skip down to the parts list.
I used the "Poor Mans MMU" method to print the top half of this, it's 7 colour changes. Start off with black then change to white, yellow, black, white, black, yellow then black to finish off.
The gcode file is based around the stock MK3 profile, the 0.2mm QUALITY MK3 with some changes. If you slice it yourself or with the 3mf file, after the purge line before it even starts printing it will ask you to swap filament. You can just reload the black but if you want to get rid of the unnecessary colour change you can remove it manually. Open your exported gcode file with a text editor like Notepad++. Press Ctrl+F and in the Find window, search for "M600", then delete the first M600 and the T0 line.
The top half 3mf file is already set up for the poor mans MMU but if you want to set it up yourself, read this its easy to do. Check out my comment at the bottom of the page though, theres a step missing in the guide, an extra setting needs changing. To see the setting in PrusaSlicer, you might need to change your user setting to Expert in the top right corner.
Parts List
- Gikfun Qi Wireless Charger
https://www.amazon.co.uk/Gikfun-Wireless-Charger-Circuit-Charging/dp/B07DC3JL89
- Micro USB charger
China snail mail:
I use:
- Rubber feet
- To secure the PCB and coil, I used some hot glue. A good 2 part epoxy would probably secure it even better but I used what I had at the time and it seems to hold fine.