Brasswool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brasswool container for the cleaning of soldering tip
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my brasswool container for the cleaning of soldering tip I designed.
Note in the pictures you can see my logo on the top, the printable model does not have it but I recommend you insert your own.
It consists of two printable parts. The bottom, with a space for tin debris, and the cover for the brasswool. They fit together easily.
Take a look on my Instagram to see more pictures and video and to stay updated with new designs.
Parts:
brasswool_holder_bottom.stl
Bottom part with raised edge that fits into the top part.
brasswool_holder_top.stl
Top cover with the rasswool room.
Print & Tips:
I personally used Prusament PLA, 0.4mm nozle and the Prusa Mini+ as printer.
Depending on your layer definition you may need to adjust the tolerance to fit the two pieces together correctly. I printed with 0.15mm layer height and it's fine!
No supports for printing are required. I suggest you to use rubber pads to put underneath.
I hope you like it. 3D modeling is very fun but also very time consuming activity. If you liked it and you want to say thank you, consider a donation :)
Enjoy!!