Light Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent people from accidently shutting off or turning on the power.
- Ocena
- 4,75 / 5
- Polubienia
- 173
- Pobrania
- 968
- Wydruki
- 8
- Wyświetlenia
- 2797
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Are you always afraid a family member/roommate going to turn the power off on your 3D printer because it's tied to a switched outlet? Is that outlet on a multi-gang plate?
Well fear no more! Just print this plate and cover combination and you're good to go.
Both plate and cover print with supports (tree supports touching the build plate). I printed the cover on its side for the cleanest result but you need to make sure to remove the small support piece that gets caught in the recess for the base plate support. Otherwise the base plate support won't snap into place correctly and the switch cover won't rock up and down.
Printed at .2mm layer height.