Network Storage - 2 Bay / 3,5" / ITX NAS / Pico PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small printable NAS for up to 2x 2.5 or 3.5" drives with ITX support
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 2107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a Remix of an design from Morganlowe on cults3D view various improvements and changes. Since I had no access to the original CAD files, I had to hack something together.
The .3mf file has many negative volumes to make everything work, so use a Slicer than supports there features (PrusaSlicer, Bambu Studio, …)
If you fancy a more advanced version with up to 4x 3.5" drives, check out my other case:
Network Storage - 4 Bay / 3.5" / ITX NAS
Changes:
- dual 3.5" drive support
- easier printing due to 45° overhangs
- removed branding / logo
- more air vents
- closed up USB holes
- fixed facette and mesh errors
Quick Specs (for more read below):
- supports ITX SoCs only (or something with a cooler not higher than 35mm)
- 3,5" drives natively, 2,5" with an adapter
- Pico PSU
- 60mm fan for cooling
Depending on your drives and used screws, you might encounter inteference with the SATA power cable. Just leave those unused, its plenty strong with 6 out of 8 too.
If you like it, consider a small DONATION :)
--------------------------------------------------
WORK IN PROGRESS, I HAVE NOT PRINTED IT YET