Network Storage - 2 Bay / 3,5" / ITX NAS / Pico PSU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small printable NAS for up to 2x 2.5 or 3.5" drives with ITX support
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 153
- Makes
- 0
- Views
- 2,127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a Remix of an design from Morganlowe on cults3D view various improvements and changes. Since I had no access to the original CAD files, I had to hack something together.
The .3mf file has many negative volumes to make everything work, so use a Slicer than supports there features (PrusaSlicer, Bambu Studio, …)
If you fancy a more advanced version with up to 4x 3.5" drives, check out my other case:
Network Storage - 4 Bay / 3.5" / ITX NAS
Changes:
- dual 3.5" drive support
- easier printing due to 45° overhangs
- removed branding / logo
- more air vents
- closed up USB holes
- fixed facette and mesh errors
Quick Specs (for more read below):
- supports ITX SoCs only (or something with a cooler not higher than 35mm)
- 3,5" drives natively, 2,5" with an adapter
- Pico PSU
- 60mm fan for cooling
Depending on your drives and used screws, you might encounter inteference with the SATA power cable. Just leave those unused, its plenty strong with 6 out of 8 too.
If you like it, consider a small DONATION :)
--------------------------------------------------
WORK IN PROGRESS, I HAVE NOT PRINTED IT YET