Eva 3 Mosquito solid face for Slice 2525 fan + faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the one piece EVA 3 front for Slice Mosquito by Saniainen
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Idea was to get a stiffer mounting location for the ADXL acceleration sensor. I was already using the wonderful solid Mosquito mount, so decided to remix it. Main differences:
- Modified for the Slice 2525 fan
- Relocated the mounting position of the ADXL sensor
- Added cable anchor points for ADXL and probe wiring
Fan mounts directly to the Mosquito heatsink at the top, and bottom is squeezed and supported by the face plate. Face plate also ties in to avoid the front from flexing due to belts pulling.
EVA standard heat set inserts for M3, and 2pcs of M2.5 inserts for the ADXL mount (M2.5 x L5 x D3.5)
I printed mine from 3DXtech ABS+CF10% and it has been working flawlessly
(version 1 in the images with no cable anchores)