Bender Phone Finder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a button that can act as a phone finder, light switch, or anything that can be triggered by Samsung SmartThings.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Demo & assembly:
This is a button that can act as a phone finder, light switch, or anything that can be triggered by Samsung SmartThings (or maybe other smart device apps). I custom made the inner workings to go inside a bender model by JHB (Original Model: https://www.printables.com/model/73094-articulated-bender). Press the antenna down to activate it.
To make the actual funtions work, it uses a Samsung Galaxy SmartTag+. A non-plus version will probably also work but I haven't tested it. They are about $30-35 on Amazon.
This is a bit more involved than what I usually design, and requires PLA, TPU (I used ninjaflex), and ideally something stronger for certain parts like Polycarbonate. There are also a couple of metal pieces in there used to increase strength and allow the moving parts to slide more smoothly. Dimensions of these are in a picture.
When printing, materials and colors (if applicable) are in the file names. The head, eyeballs, and Tag Mount will require supports, but other than that they shouldn't be required.