Pumpkin Planter (Easy Print) Halloween/Fall Themed Planter Pot with Drainage Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple pumpkin planter pot that is easy to print.
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 377
- Wydruki
- 2
- Wyświetlenia
- 1384
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple pumpkin planter pot that I designed to be as fast and easy to print as possible. The design includes a series of drainage holes to keep your plants happy and healthy.
Dimensions: By default, the planter is 3 inches in height and has a 3 inch opening. Scaling up shouldn't cause any issues, although scaling down too much may leave the walls too thin.
Printing: This should be a VERY easy print. The walls of the planter are exactly 1.6mm thick, so four passes with a 0.4mm nozzle will get the job done without needing infill. I printed with Overture Orange PLA, and was quite happy with the color.
This model is not for commercial use. If you are interested in selling your 3D prints of my models, please refer to my Patreon!