Mini Ceramic Rod Knife Sharpening Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight sharpening tool meant for use in the field. Comes in various angles.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for two 4.5" (114.3mm) long, 5/16" (8mm) diameter ceramic rods. You can buy them this short, or cut a 9" stick in half. I cut a 9" stick in half. It was quite easy. A dremel cut off wheel was used to score the stick. By the time I got ~1.5 mm deep all the way around, the built up heat caused the stick to cleanly break exactly how I wanted.
The hole to secure the door to the base is designed for a #8 wood screw (0.164" or 4.2mm major diameter), 1.25" (31.7mm) long. At least 8 mm of the screw need to be thread-less to allow the door to rotate. If you don't have this type of screw, you can file/grind down the threads.
I was able to print this without supports, but I had to increase the external perimeter extrusion width by ~50% above the default (higher width allows for steeper overhangs) and use variable layer height with 0.15mm layer height at the top of the storage slots.
Comes in 15°/20°, 18°/22° and 20°/25° combinations.
The full-sized version of this model can be found here: https://www.printables.com/model/817201-ceramic-rod-knife-sharpening-base