Orbiter 2 adapter for Mantis + Rapido HF/UHF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Orbiter 2 extruder adapter plate for the mantis toolhead
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 1375
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a wip mod, and it's currently used just on my printer. Consider it as a prototype!
I recently received an Orbiter 2 extruder and wanted to use it with my Mantis CPAP and Rapido UHF setup. So I modified the LGX Lite mount to be able to mount it.
I use it with this duct https://www.printables.com/model/389622-wishbone-voron-mantis-cpap-part-cooler-duct-rapido but the securing screws do not align so you might need to enlarge the holes on the duct with a dremel to secure the duct with screws.
NOTE: if you use the 2x5015 fans setup you will need to use a shorter spring and screw as the right side fan will not properly fit otherwise
Requirements:
- 2 brass threaded inserts for the adapter.
Update 18 Oct 2023: added clearance in the adapter to not collide with the orbiter 2 steel filament guide