Orbiter 2 adapter for Mantis + Rapido HF/UHF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Orbiter 2 extruder adapter plate for the mantis toolhead
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 161
- Makes
- 0
- Views
- 1,375
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a wip mod, and it's currently used just on my printer. Consider it as a prototype!
I recently received an Orbiter 2 extruder and wanted to use it with my Mantis CPAP and Rapido UHF setup. So I modified the LGX Lite mount to be able to mount it.
I use it with this duct https://www.printables.com/model/389622-wishbone-voron-mantis-cpap-part-cooler-duct-rapido but the securing screws do not align so you might need to enlarge the holes on the duct with a dremel to secure the duct with screws.
NOTE: if you use the 2x5015 fans setup you will need to use a shorter spring and screw as the right side fan will not properly fit otherwise
Requirements:
- 2 brass threaded inserts for the adapter.
Update 18 Oct 2023: added clearance in the adapter to not collide with the orbiter 2 steel filament guide