1 / 2
Bambulab Nozzle Wiper - Easy Print - No Supports or Rafts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy printing stl for BLB nozzle wiper
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
I did not like the original print when I used auto orient and printed it without supports.
This model eliminates the need for using supports and makes it easier to print. Uses common m3x6mm screws to install.
Assembly Instructions:
- Just lay it flat and print without supports
- Cut the 4mmptfe tube to length to fit the inside
- Enlarge the ends of the PTFE with a Philips or allen key for easier screwing
- Use two m3x6mm (m3x4mm if works) screws to install the tube
Printing Instructions:
- Material: ABS or at least PETG for high temp and sturdiness
- Infill: 100%
- Supports: No
- Rafts: No
- Brim: No