1 / 2
Bambulab Nozzle Wiper - Easy Print - No Supports or Rafts — image 1
1 / 2

Bambulab Nozzle Wiper - Easy Print - No Supports or Rafts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Easy printing stl for BLB nozzle wiper

Rating
5 / 5
Likes
13
Downloads
148
Makes
1
Views
494
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I did not like the original print when I used auto orient and printed it without supports. 

This model eliminates the need for using supports and makes it easier to print. Uses common m3x6mm screws to install. 

Assembly Instructions: 

  • Just lay it flat and print without supports
  • Cut the 4mmptfe tube to length to fit the inside
  • Enlarge the ends of the PTFE with a Philips or allen key for easier screwing 
  • Use two m3x6mm (m3x4mm if works) screws to install the tube 
  •  

Printing Instructions: 

  • Material: ABS or at least PETG for high temp and sturdiness
  • Infill: 100% 
  • Supports: No 
  • Rafts: No 
  • Brim: No  

 

Tags