Prusa XL series: Single Dry-Box bowden passtrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to have a angled passtrough for my special Filaments . This way i dont need rollers for the Filament Spool.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 1373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to have a angled passtrough for my special Filaments . This way i dont need rollers for the Filament Spool, since the Extruder has more than enough strenght to pull the Filament.
This is a Remix from 3DPR that worked like a charm for M10 PTFE Fitting. For the Prusa XL you should consider using PTFE Tube with ID 2,5mm instead of 2mm. This is not so common but this way you have less resistance.
Of course i will also add a Humidity Sensor and Silica Gel container.
I used m3 Screws and this Filament Dry Box:
https://www.amazon.de/gp/product/B08CKB2B12/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114