1 / 6
Minisforum HM90 downside cooling
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minisforum HM90 downside cooling with space for 2x 2.5inch disks
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 919
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Minisforum HM90 downside cooling is a case thats attaches to the bottom of the minicomputer and holds two 2.5inch disks with a fan that cools all components from the bottom.
If you want to recreate this you will need:
- 1x 140mm fan, like:
- https://www.amazon.com/-/de/dp/B00KF7O58G/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2NVH9QF5H3MVX&keywords=140mm%2Bfan&qid=1696679270&sprefix=140mm%2Bfan%2Caps%2C153&sr=8-3&th=1
- https://www.amazon.com/-/de/dp/B07H3NZG5D/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2D9G1U8WGPT1U&keywords=140mm%2Bfan%2Bartic&qid=1696679305&sprefix=140mm%2Bfan%2Bartic%2Caps%2C149&sr=8-3&th=1
- 2x Sata extension cables(30cm), like:
- https://www.amazon.com/-/de/dp/B0925XMFY3/ref=sr_1_3?crid=2H7YLG10IJ6TJ&keywords=sata+extension+cable&qid=1696679451&sprefix=sata+e%2Caps%2C155&sr=8-3
- https://www.amazon.com/-/de/dp/B09DCH82W1/ref=d_pd_di_sccai_cn_sccl_1_2/134-8142078-2463265?pd_rd_w=uuCf1&content-id=amzn1.sym.751acc83-5c05-42d0-a15e-303622651e1e&pf_rd_p=751acc83-5c05-42d0-a15e-303622651e1e&pf_rd_r=8BGWA1B7B0VA2YH6RKRG&pd_rd_wg=ewx3s&pd_rd_r=3d16eb74-8c2f-47c6-b305-3b8a2ebaaa38&pd_rd_i=B09DCH82W1&th=1
- 8x Screws for the disks
- 8x Screws for the case and fan
When you have all the parts you will have to:
- Connect the drives to the extension cables
- Screw the drives in with the extension cable under the disk
- Modify the fan like shown on the pictures so it will fit into the case
- Screw the fan into place (keep in mind to put the extension cables aside the fan like shown in the pictures)
- Get the motherboard out of the case
- Use wire taps (in German “Strom Diebe”) to “steal” to power from the original fan for our Fan
- Yellow → +12V
- Black → Ground
- now put everything back together and connect the disks
- Screw the bottom to the original case
And you are Finished!
If you want to Improve or change something in my design you can use that link to Onshape: