Milk Carton Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to effortlessly open any drink carton like milk cartons using a Tetra Pak™ WingCap™ 30 cap.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
“Now you can have milk every day!”
Most of the milk we can buy in cartons now comes with Tetra Pak™ WingCap™ 30 caps, which sometimes can be difficult or painful to open by hand when they are unopened, as they require more force to break the seal while opening, especially if you or your significant other doesn't have a lot of hand strength or have long fingernails. This could also be helpful if you have arthritis or some form of accessibility issue.
If you like what I'm doing, please give it a like 👍 consider joining my club or buying me a coffee! 😃👍
Versions
There are three different versions. They all have in common that the end you place onto the cap includes two orientations the cap can be in, making it easier to place, no matter the orientation the cap is in. They are ordered from the least amount of force required to the most amount of force required:
Leverage
Takes up more space, but requires the least amount of force to open the caps, as leverage is used. Caps are the easiest to open with this version. It also has a hexagonal pattern on it, which makes it look cooler, as hexagons are the bestagons.
Compact
Takes up less space, but requires a bit more force than the leverage version. Still, it is a lot easier than opening the cap by hand. The ergonomic shape allows it to be used equally well by people with small or large hands.
Minimal
Takes up the least amount of space and requires about the same amount of force as the compact version, but it lacks the ergonomic shape that makes it easier to grab the compact version. Still, due to its square-ish shape and being much thicker than the cap, it's easier to open the cap than without it.
Printing instructions
Prints easily without supports using PLA at 0.2 mm layer height in the default model orientation.
Other materials should work as well, as long as they allow for some amount of bridging, like PETG. But I wouldn't recommend printing this in PA or PC.
You can also use different layer heights without any issues.
Compatibility
This is the kind of cap (Tetra Pak™ WingCap™ 30) this tool can open (image source):
