IKEA JANSJÖ Lamp Replacement Switch Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little rock switch holder in order to replace the original switch that led to light flickering problems.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello,
Here's a rock switch holder for an IKEA JANSJÖ lamp. My switch was causing the light to be flickering sometimes, so I wanted to change it. The switch used is a Carlington 621 series switch, but it can accept any switch with a dimension of approximately 12.8*19.3*26mm. A STEP file is included for any remix :)
Print at 0.2mm layer height, 4 perimeters with no support needed.
!WARNING! You are the only one responsible for the electrical work. Do it at your own risk!
Want to support me?
=> Have a look at my USB power supply mod (5V/1A) for Prusa MK4(S)/3.5(S)/MK3(S)(+) and Prusa XL, perfect for powering Buddy3D cameras or similar: 3DMind.ch