Thumbscrews / thumbnuts M3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Long thumb nuts with an M3 threaded insert, with optional fins at the end for easier screwing/unscrewing.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Put an M3 threaded insert into it and then you can use it as a nut to put somewhere to screw/unscrew easily by hand. It has a total length of 20 mm. You can also unscrew it using a PH2 bit at the end, in case you screwed it on too tightly or you want to screw it on more tightly than by hand.
There is a version with and without fins. With fins, it's even easier to screw by hand, but it takes up more space.
Prints nicely in PLA in the default model orientation without supports at a layer height of 0.20 mm.
If you like what I'm doing, please give it a like 👍 consider joining my club or buying me a coffee! 😃👍
