1 / 3
Ultra minimalist phone holder into the car
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is super simple, parametic phone holder can you easy modify with Prusa silcer.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 1678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I did use m3 screws that I connect the uper part to lower part. This sulutions allows that two parts close any angle, so easy connect anything. I used on double sided adhesive tape that I connect upper part to car. The phone holder can you fix to the lower part with superglue or duble sided tape adhesive. Important you"ll print from ABS the car inside have warm up to high.