Armrest Cover Hinge Repair for VW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hinge repair designed for the center console armrest for a VW Golf, though it should work for other VW models.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 493
- Wydruki
- 3
- Wyświetlenia
- 2138
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to repair the broken hinges on the center console arm rest cover of a Volkswagen Golf, but if my research is correct, I think it will work on several Volkswagen models including many Volkswagen Golf, Jetta, Beetle, Bora, Passat, Lupo, and Skoda Octavia.
Your best bet is to look at the included picture to see if your hinges look the same.
If so, the repair involves cutting off whatever remains of the factory “arms” using a rotary tool, and gluing (I recommend JB Weld) and/or screwing this plate in place. It should be centered, and the edge should line up with the rectangular indent on the inside of the cover.
This should be printed in a heat tolerant material as PLA will not last in a hot car. I printed this at a 0.2 layer height WITH supports out of black PETG.