Liczymy pasujące modele…
This is a simple wall art model of a VW Golf mk7 with the "R" spoiler, but it is based on a TDI SEL. On my profile I have a version with a roof rack, if you like the aesthetics of that better! The model was intended to be printed small,…
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
DaylightDiscoRainbow-Stick-Mounts 2020 Mounts for Daylight/Rainbow/Disco on a stick/XXL/Matchstick that has a nice diffuser and looks prettyish... well, better that PCB's bolted to your extrusions V2 update includes design change to use…
Simple case for FTDI FT232 USB to TTL Serial converter module. For simpler usage, it contains also description of pinout and output level switch. Designed in OpenSCAD. Printed on Alfawise EX8 with Alfawise PLA, which explains not so nice…
Hi, here comes a small housing for the RFD 868x long range telemetry module from RFDesign. It should also be suitable for the RFD 900. It´s a Remix of the original “ RFDesign RFD868x housing” It comes with the additional cable outlet for…
this is a housing for a usb-serial converter I recommend ISO7380 M3x6mm screws, but the print also provides clip-in without screws Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2mm…
This model is based on the original model by LutraVulgaris (@Otter) for the VW Golf GTI Mk4 with the GTI logo visible when you look from the top of the model! (Go check out the other awesome car silhouette models by LutraVulgaris too!)…
I decided to scale the model to be 1:10. In order to print it on my Ender 3 V2 I had to split a couple of the STL files. The files, ‘F-1_Powerpack’ and ‘F-1_Outrigger’ have to be scaled to 227,90%. The ‘F-1_Powerpack’ STL file had a…
68mm Lufteinlass für GrowBoxen Lässt Luft durch aber kein Störlicht rein/raus 68mm entspricht den standard Lochsägen für z.B. Steckdosen -- 68mm/ aprox 2.67 inch light proof air intake for growbox air passes through but leaves no light…
This is a Upgrade Part for the Ref Numbers (0 281 002 216; 028 906 461) fitting a variety of 1,9 DTI engines present in Passat 3BG, Audi A4 b5, Audi A4 b6 (longitudinally mounted engines) This Part increases the diameter of the housing…
This is a no nosense, precise fit case for an FTDI Adapter of the type listed below. It is remixed from the original version : Tightened tolerances of openings to be more precise. Added LED view ports to the top for both Power, and RX/TX…
Accurate-ish reproduction of a VW 2.0 TDI head gasket (2009 period, I don't know how much they changed). For keychains I suggest a X dimension of around 50/60mm and z of 2 mm For optimal result I suggest using a 0.2 mm zozzle
A case for a FTDI Adapter FT232RL. Pretty tight fit. https://cuitbuilts.wordpress.com/2018/03/04/ftdi-adapter-ft232rl-case-3d-print Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0.2…
TSI, TFSI, TDI VAG keychain
I modified this for my situation, I ordered Tr8*2 POM Nuts from robotdigg, that is larger and has a different hole pattern than the usual leadscrew nuts. The pictured Ender 3 pro now has dual Tr8*2 leadscrews :D Category: 3D Printer Parts
Wheels do not spin. Supports required. Fan request. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) (heavilty modified to make it printable.)
M14x1.5 Schutzkappe für Diesel-Injektoren und Rail-Hochdruckspeicher. Ideal für den Wechsel von Injektoren um Schmutz im Kraftstoffsystem zu vermeiden. PETG oder ASA ist empfehlenswert, PLA hat aber bei heißem Motor ebenfalls funktioniert.
Centreur d’embrayage 28 dents golf 4 1.9 TDi
This thing removes the P2015 error and engine error. I printed this in ABS with 99% Infill. Category: Automotive
“Realistic I4 piston motion” 4piston 1.9tdi variation of popular print in place fidget toy. Enjoy and please like :D
This is a housing for the common "off the shelf" USB to serial (FT232RL) FTDI Adapter. It was desiged to be used with the "MaXYposi CNC plotter" but will work for other projects too. A cover (e.g. made of arcylic glas or PCB leftovers)…
For smartDIYs FABOOL Laser Mini assembly. V-Slot frame Right angle jig. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/493 ) smartDIYs Web site:…
IDGAF Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: IDGAF Infill: IDGAF Filament: IDGAF IDGAF IDGAF Category: Outdoor & Garden
Einfach aus Flex drucken. Viel Spaß damit. ;)
Kupplungsdorn zum Zentrieren der Kupplungsscheibe für VW T5 & T6 2.0TDI 102PS 115PS 140PS 178PS Clutch Tool for VW Transporter, Multivan, Caravelle, DOKA T10372
Werkzeug zum Abziehen der Glühkerzenstecker ohne eine Spezialgange (VW 3314). Tool for removing glow plug connectors without a special tool (VW 3314).
remix from expee, because my adapter has same size but different layout.
Avant TDI Logo im Retro RS2 Look. Ersetzt das Quattro Logo mit der Teilenummer 4F9 853 736.
A little bit changed VW 3313 tool for fuel pump timing setup. Tested on VW T4 AJT. Works perfectly Print Settings Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 80% Filament: Verbatim PETG Notes: Print horizontally…
Press-fit and/or glue Dupont connectors into the cutout on the housing. When set onto the WT32-ETH01 the connectors will be over the correct pins in order to program the chip with a FTDI adapter.
A simple case for the Moyina USB to TTL adapter. I did modify the text on the case from that in the posted pictures. The original case had too small of letters which made them unreadable. The letters were enlarged in the current STL…
I wanted to use the AMS in an airtight box. To fit in I designed a new holder. I bought this airtight box: IRIS Ohyama, 70 liters https://www.amazon.de/gp/product/B06XXD6FHC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 First print out…
Less restrictive replacement for the original scoop. Utilizes original hose. Printed with ABS.
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC. My…
Folds around the PCB to prevent shorting on tools. Print at 0.2mm layers. Fold it up while it's still warm but don't clip it in yet and let it cool. You'll need to trim down the thru hole pins. Insert a piece of filament as light pipes…
Una pieza para conectar los modulos de los hormigueros de AntDimension y AntMaster entre si. Y una pieza de bloqueo para asegurar la parte de AntMaster. La de AntDimension se fija mediante dos tornillos M3x10. Recomiendo imprimir girando…
Un soporte de tubos Reinas "Bambu" con conexion con los modulos de Antdimension Usa imanes de neodimio (mejor N52) redondos de 6x3mm. Fijalos con pegamento cianocrilato Mira otros modelos de la coleccion Tubos reinas "Bambu":…
I made small modification to Atari SIO plug in order to fit in the FT232RL USB to serial board from ebay . The board dimensions are 26x16mm without pin header. In the Atari plug I used 3.96mm pitch contacts (for example ). To wire the PCB…
Box+lid for storing the orange filter provided with the Sealife Sportdiver underwater housing
sized to fit in the grill of a 2001 VW Jetta TDI
This is a case for the FTDI adapter, which has been adapted from the original for fixed mounting, and is generally simplified with all the text. The case is not designed for switching between 3v3V and 5V, but also the connection of the…
Snap fit, no hardware required. It's a tight fit for the PCB, which ends up helping hold it in place.
Snap fit case for a common FTDI TTL Serial Module. All the cases I could find were press fit (didn't stay together) or required screws. Plenty of clearance around the USB port and the pins to allow space for connectors. This case snaps…
An enclosure for an FTDI-be-gone with a micro USB connector Update: Added files for the USB version as well. Print instructions Requires two pan head M2.5x8mm screws
Basurero para hormigas diseñado para los forrajeos MK2 de AntDimension. Pensado para colocarlo en una esquina salvando la pieza TJoin. Es ligeramente más pequeño que el basurero oficial que la tienda ha sacado, por lo que se puede usar en…
Halter für einen FTID USB zu Seriell Adapter Dieser Halter dient der Montage eines FTDI Breakout-Boards. Die Adapterplatine wird in den Rahmen gelegt und mittels zweier PT-Schrauben 2,5x6mm und zwei zusätzlichen Polyamid (Kunststoff)…
Is your leveling sensor stick on broken you can use this. On the pictures it has been there for 4 months. just put some grease in it and press it on.
headgasket keyring
Update V2 - 20240425 - Update to use also for Honeycomb Storage Wall ---------------------------------------------------------------------------------------- Bauteile / Parts: 1x Querträger_Crossbeam 2x Rolle_Roller 4x Kugellager/Bearings…
Dual side VW TDi keyring. Printed on a P1P 0.2mm nozzle and AMS. Uses a 14mm ring inserted during the print at the appropriate layer. On my print paused print at layer 35 with a layer height of 0.1mm.
I could not find anything on Thingiverse that fit my RobotDigg PLA spools so I made this 4 mm thick spool holder, quick print. With a small mod you could adapt it to fit any 200 mm diameter spools. Fits 21.93 mm diameter skate bearings,…
Walt Disney Signature Outlet Plate Cover Add a touch of magic to any room with this Walt Disney Signature Outlet Plate Cover! Featuring the iconic Disney signature engraved or embossed across the face, this 3D-printed cover is a subtle…
This is a remix of Jpearson's perfectly fitting USB to FTDI adapter case. Thanks to DavieSprocket's suggestion to use Tinkercad to convert the original STL to an OBJ so I could work on it. I suggest printing this on it's tall side with…
Rigid belt slide loop for polymer Ka-bar Large TDI Knife. Print file on vertical side and no supports are needed. Six M3*10 screws & nuts needed for assembly.
Seřizovací pravítko vačkového hřídele 1.9 TDI ALH 66KW
This Mounts to the 4 screw holes on the TDI/Hinder holster for the Tek-Lok belt system. No more messing with steel spring belt clips.
Golf 4 1.9TDI 3,5inch sport filter adapter. Print in ASA/ABS or better. (Maybe PETG could work) Fits on original MAF. Has a fitting for vacuum hose. Should fit any 3,5inch (89mm) inside diameter filter.
This cat food dish is designed to have a large area, but be shallow with a steep edge rim and wide base. Because the dish shallow, the cat can get to the bottom without being strangled by the rim. The steep rim helps make sure catfood…
These are the printed parts to make adjustable-height feet to attach to the ends of the 2040 horizontal extrusions of the base frame of a Robotdigg SCARA printer. The printer needs 3 of them. The other parts you need are need three…
I have a PETDisk MAX v 2.0 SD card reader from bitfixer (link below) for my Commodore PET which I highly recommend. It's easy to put together and plugs into the IEEE port on the back of the Commodore PET. Designed in Fusion 360. This is a…
If you've got a SeaLife SportDiver enclosure for taking photos underwater and also got a fancy new iPhone 17 Pro, you might be disappointed to find out that the bumpout for the camera is so wide that it doesn't fit into the lens port of…
Crude model of an Inland FTDI. Used to make a case. https://www.microcenter.com/product/656323/inland-ftdi-adapter-usb-controller
Fits the Astrodyne TDI 084S.01500.00 and 082S.01500.00 C14 power inlet. This is a high quality power inlet for 120v 15amp max 3D printers. It is normally a “snap in” power inlet and is held in place by metal tabs, but often the force of…
The is an open bottom enclosure. A snap bottom could be made. Since the USB cable sticks out past the enclosure it could be extended to allow for flush sitting while plugged into usb.
Needed an oil filter wrench for my 2001 Golf TDI so I decided to make one. The wrench has 14 flats and with either 74mm or 75mm diameter. Probably fits many other VW and Audi models as well. The 74mm version is a pretty snug fit on my MK4…
Multiple belt covers compatible with old european shutters. Needed Materials: Brush seal: https://amzn.to/42lmIH1
Here is the XXL-version of the diffuser for the Klarus XT21X flashligt. :-) Handy when you need to turn all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage, in the garage or on that…
Simplify3D settings Infill %: 25 Layer Height: 0.3000 Top Layer: 3 Bottom layer: 3 Outline shell: 2 Category: Electronics
Layer Height 0,15 wall line count 4 top layer 1 bottom layer 1 indfil 0% print speed 70 mm/s (reduce speed if necessary) use brim use fuzzy skin (for diffuse effect) PLA Filament – 1,75mm – Neutral/transparent
Cache central pour volant 4 bumpers de Golf 1 en version TDi
Case for Inland FTDI and SenseAir S8. Basic case to hold Inland FTDI and SenseAirS8. Use 4 M3 x 6mm screws to hold the top on. STEP file included.
Here is the diffuser for the Klarus XT21X flashligt. Handy when you need to turna all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage together with the Klarus Fottstand that you can…
AUDI 2.5TDI HEADGASKET-keychain
After printing for better optics: grind and painting in mat black
remix of the detdisp folder for my merican bros. with and without the ‘come and take it’ text.
This is just Jperson's excellent USB FT232 case with some added mounting tabs. For the case lid, please see jperson's project Print instructions Category: Electronics Summary This is just Jperson's excellent USB FT232 case with some added…
NISSAN TERANO 2 (2.7 tdi) Bague levier de vitesse
Habe hier ein Werkzeug entworfen um Ventilschaftdichtungen sauber und ohne Beschädigungen zu montieren. Habe es für einen Opel X20XEV Motor entworfen, sollte aber auch bei anderen Motoren funktionieren. Vorne ist ein Dorn um die Dichtung…
AdaFruit makes a handy Serial to USB adapter called the FTDI Friend . This lets you connect your laptop or computer to a digital level serial port on a Raspberry Pi or Beaglebone using the FTDI serial drivers. I use these when talking to…
Audi R10 TDI as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Made for enclosure this module: https://s.click.aliexpress.com/e/_c3EsdM4L This custom enclosure is designed to protect and house a USB-C FTDI. The two-piece design provides a precise fit for the PCB while leaving the USB-C connector, pin…
Print and manufacture from steel. Fit Volkswagen 1.9tdi engine with original turbo support bracket. If no support bracket, make RH model longest extension shorter by 3mm
Podkladová destička pro logo TDI – Škoda Octavia II (gril) Vymodelovaná a vytištěná podkladová destička slouží jako montážní základna pro originální nebo aftermarket plastové logo TDI , které se dokupuje zvlášť. Destička je navržená…
This is the valve that sits on top of the valve cover on a 2.5 tdi powered volvo V70 / S70 P80 , maybe P2 and possibly S80, that connects it to the intake pipe, before the turbo. It's the mirror of the CCV valve from a 1.9 TDI ALH,…
This remix of https://www.printables.com/model/1443418-sealife-sportdiver-iphone-17-pro-adapter is designed for model #SL405 (SeaLife SportDiver Ultra). Since the camera opening in the housing is smaller in height, the original model will…
Ka-Bar TDI Law Enforcement knife sheath attachment for use with the Blade Tech Tek-Mount Mini quick connect mounting system. Unscrew the factory belt clip with a T6 bit Includes a direct thread and heat insert version of the mount Screw…
This is a simple enclosure for the Bitfixer PETdisk v1 (a SD card floppy emulator for the Commodore PET series). I've never been able to find one online, so I made this on TinkerCAD (my first build). Don't expect much, it is just a simple…
Create your own unique air freshener with this 3D-printable keychain system! This modular design allows you to freely combine decorative inserts with two main body types: a classic hanging keychain body or a clip-on body for mounting on…
Passt zu diesem Gehäuse: https://www.thingiverse.com/thing:3046535 Print Settings Printer brand: Anycubic Printer: Vyper Rafts: No Supports: No Infill: 20 % Filament brand: any Filament color: any Filament material: PLA
the little nubs on the side should be the correct size, but at least on my FDM printer I still had to cut away a bit with a knife. If you print them on a resin printer they would likely fit, but I can't test that. ^^
The TD1s is a brilliant gadget developed by Ajax -3d and is indispensable for determining the transmission distance and colour of prints when creating the likes of HueForge documents. For more information, check out the WEBSITE. This box…
Print with supports. Pls like and post makes. Good luck!!!
Land Rover Defender - Clutch Alignement Tool Tdi/TD5
I made this using photos of a stock badge to get the font correct and I matched the size, side taper, and curvature to a chrome set I had already. I also included a negative cutout guide which can be temporarily taped onto the car so the…
