Xmax3 120mm fan back cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120mm fan adapter for Qidi Xmax3 motherboard cooling fan
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 183
- Wydruki
- 5
- Wyświetlenia
- 1354
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The stock motherboard cooling fan for the Qidi Xmax3 is quite loud and always on.
The motherboard does not have any extra programmable fan headers, so I designed this replacement back cover to install a silent 120mm fan in place of the OEM 40mm fan.
Thickness constraints require you to mount the new fan on the outside. A super thin fan might fit inside.
This cover prints in 2 pieces that will (barely) fit on the Max3 build plate. I glued them together, though this isn't strictly necessary.
Lastly, the board's fan header is 24v, but most 120mm fans are 12v, you will need a means to supply 12v to the fan. I recommend a cheap buck converter from Amazon.
https://www.amazon.com/dp/B08NV3JCBC