5 inch Quadcopter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the name suggests, this is a 3D printed quadcopter.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 2377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
As the name suggests, this is a 3D printed quadcopter. I am assuming you have some experience of building a RC machines if you are attempting to print this, so this will not be an inclusive tutorial.
Printer Parts You Need:
Antenna Mount x1
Camera_Left x1
Camera_Right x1
GoPro_Mount (if needed)
Landing_Pad x4
Lid x1
Moto_Guard_FrontR x1
Moto_Guard_FrontL x1
Moto_Guard_BackR x1
Moto_Guard_BackL x1
Quad_Body x1
Spacer_Long (as needed for stack)
Spacer_Small (as needed for stack)
Additional Parts:
FPV Camera x1
Flight Controller (FC) x1
Video Transmitter (VTX) x1
VTX Antenna
Receiver x1
4 in 1 ESC x1
Brushless Motors x4
Propeller x4
M3 screw (buy a variety kit!)
M3 threaded brass inserts x10 (Use a soldering iron to press the threads into the larger holes of the body)
Print instructions
Everything should print easily!