1 / 6
Frsky R9MM and T antenna Martian II bay — zdjęcie 1
1 / 6

Frsky R9MM and T antenna Martian II bay

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bay is 8mm and the top plate is 1mm tall. 9mm together (duh). Fits r9mm and the T antenna for the Frsky R9M. Use a…

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Bay is 8mm and the top plate is 1mm tall. 9mm together (duh).

Fits r9mm and the T antenna for the Frsky R9M.

Use a small piece of 3m foam tape to keep the receiver in place. Also make sure that there are no sharp bends in your antenna wire to keep signal integrity. I have gotten some impressive distances with this setup.

Print at whatever settings you want. I printed at .2mm with 20% infill.

My designs are powered by beer, time, and filament. If you like my design and feel generous, https://paypal.me/jessetms.

Category: R/C Vehicles

Tagi