Key enlarger / key turner assistant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Like many people we have some doors with warded locks which just don't look good and could be hard to operate by…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Like many people we have some doors with warded locks which just don't look good and could be hard to operate by children, elder peolple and people with disabilities. So I decided to design this little helper.
You are free to modify it, here's a link to Tinkercad:
https://www.tinkercad.com/things/i1eHGwAUfJy
But please mind the licence agreement. :-)
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Yes
Resolution:
0.2mm
25%
Notes:
DON'T PRINT THE "fully assembled" FILE! It's just for viewing purposes.
* The key enlarger should be sturdy enough with not more than 25% infillFlip the design 180° before printing (opening downwards), so you won't see the residues of the removed support on the outside afterwards
Post-Printing
Remove the support thoroughly so the key will fit into the casing
- Use flat headed screws, size should be around 2,5x10mm
Turn!
How I Designed This
So this is how it startet. I measured my key in the cellar and started designing this right awy in Tinkercad using some basic forms.
Category: Household