Ohio State String Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This suspended Block O inside the outline of Ohio using bridges for the strings. No supports are Necessary.
This is designed for 0.2mm layer height prints. You must set you your wall generation to Arachne or else the strings will not show up in the sliced model.
I was able to paint the strings easily in Bambu Studio. The file is a little bit big for the Prusa 210x210 build volume. I was able rotate the print and set the scale to 99% and it fits and slices properly. I have only tested printing this on my P1S.
Tips: For Bambu Studio I shut off the accessory, as well as turning the part fan down to 50% fan for the entire print. This is because it would cause the strings to move around while printing eventually deforming them. If you have an AMS the model is designed to be able to be split into parts for easy coloring.
Much of the inspiration of this was thanks to STomHacks and his Suspended Hand model.