1 / 1
Logitech Z623 Wall Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Attached Image is of the recommended printing orientation.
Uses M4 Socket Headed Cap Screws and M4 Nuts. Tolerances are tight, if your printer might need this scaled up 1-4% to help with clearance
The screws used to attach to the wall are intended to be Sheet rock screws, with a plastic wall anchor insert. A good alternative to this is using 3M VHB double sided tape. Use this at your own risk. I haven't fully tested this, and Polycarbonate-Carbon Fiber is way overkill for a situation like this but it helps guarantee that I wont have to iterate over this to make it perfect.