Logitech Z623 Wall Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is made to mount the speaker to a wall, and have it articulate.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 850
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Attached Image is of the recommended printing orientation.
Uses M4 Socket Headed Cap Screws and M4 Nuts. Tolerances are tight, if your printer might need this scaled up 1-4% to help with clearance
The screws used to attach to the wall are intended to be Sheet rock screws, with a plastic wall anchor insert. A good alternative to this is using 3M VHB double sided tape. Use this at your own risk. I haven't fully tested this, and Polycarbonate-Carbon Fiber is way overkill for a situation like this but it helps guarantee that I wont have to iterate over this to make it perfect.