1 / 2
Ceinture moteur Nema_17 pour accessoires / Nema 17 motor belt for accessories — zdjęcie 1
1 / 2

Ceinture moteur Nema_17 pour accessoires / Nema 17 motor belt for accessories

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ceinture moteur Nema_17 pour accessoires / Nema 17 motor belt for accessories (Led, BL-Touch, ect...)

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Je cherchais un moyen d'installer un BL_Touch pour ma Geeetech I3 Pro W.

Finalement, j'ai réaliser ce cerclage de moteur Nema_17 pour fixer le capteur sur le moteur de mon extrudeur direct drive.

Fait le job parfaitement, aucun jeu et pas de démontage du moteur requis.

J'ai également réalisé différents cerclages avec une patte percée ou non, dessous ou sur le coté, pour y fixer divers accessoires, comme des Led, un détecteur, ect….

Si vous téléchargez cette création, laissez moi un “J'aime”

Si vous appréciez cette création, payez moi un café
https://www.buymeacoffee.com/f5pgtu

I was looking for a way to install a BL_Touch for my Geeetech I3 Pro W.

Finally, I made this Nema_17 motor strap to attach the sensor to the motor of my direct drive extruder.

Does the job perfectly, no gap and no engine disassembly required.

I also made different belts with a pierced tab or not, below or on the side, to attach various accessories, such as LEDs, a detector, etc.

If you download this thing, please, give me a “Like”

If you enjoy this thing, buy me a coffee
https://www.buymeacoffee.com/f5pgtu

Tagi