Universal soil separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soil separator for planter pots with diameter of base less than 18 cm. It can replace drain layer in planter.
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 1287
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model info
This is soil separator for any planter pot with a diameter of base smaller than 18cm. It supports growth of roots. I made two versions, one without a pipe (for plants which don't need a lot of water). I also made one with a short pipe near the center (for plants which need more water).
Print instructions
Print from PETG or any durable and flexible filament.
Using
Put this printed soil separator in a planter. Arms around the center should be slightly bended upwards as can be seen in the first image. Then fill the rest of the planter with soil. If you print version with pipe you must fill the pipe with soil before you fill the entire planter pot. It helps water rise to roots.