Shure KSM141 microphone dust cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dust cover for the Shure KSM141 microphone, which easily slips on and off with a very slight friction fit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This dust cover fits on over the end of a Shure KSM141 microphone, with a very slight friction fit (just enough to hold it on by the pattern selection ring). I like to keep many of my microphones set up and ready to go in the studio, and I think these little covers do the job nicely and look a lot better than plastic bags.



I printed it out of PETG for its flexibility, temperature stability and low friction when slipping on/off. It prints upside-down, directly on the build platform with no supports needed:

Enjoy!