Bambu Lab X1C Chute Cover with Sliding Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An exterior cover for the poop chute on an X1-Carbon. The sliding door makes it easy to release waste periodically.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 1020
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This cover goes over the chute on the backside of the X1C. The door slides up to release the waste.
The backside of the “base” part is flat so you can choose how you want to secure it. I originally intended to use double sided tape but then found some magnetic tape with an adhesive backing that works great (although I did need to superglue the magnet tape to the part to get it to stick) and makes it easier to take off the machine if needed. It can readily be found on amazon with a search for “magnetic tape with adhesive backing” (look for a ½" wide roll).
My printer was getting too cold at night so I'm trying to close up some of the gaps in the enclosure. This chute cover was part of that process.