1 / 1
WLToys 144001 | Tires with spikes | Print In Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLA spikey tire for WLToys 144001
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
I have never seen such a tire, so owning a 3D printer gives you the oppurtunity to experiment! This is a print in place spikey tire for you rc vehicle. The model is designed to match the original hex nut. Ideal on soft and wet soil, not so good on road. Hope you enjoy and share your opinion in comments!
Printing settings that I used:
5% infill
5 layers top/bottom
0.2mm layer height
Standart PLA used
Feel free to share photos of your rc vehicle covered in mud :)