IKEA SKÅDIS Passthrough With 5x5mm Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this passthrough connector designed for the Magnetic PTFE Tube Connector system with 5x5mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of IKEA SKÅDIS PTFE Holder TwistLock Remix by radiojack. My variation is designed to work with the Join PTFE Tubes Together Magnetically! by Line Arc Line system.
This coupler allows you to join two ends of PTFE tubing together with 5x5mm magnets. I used these magnets from Amazon.
The bulk height is intention so the magnets aren't too close to each other and repel away or fall out. I plan on making a future iteration with a hole in the center so you can see when the filament is. I might also consider designing a cap.
Print settings are 100% infill and no supports at 0.2mm height.