1 / 4
Wet art panel carrier corner, plein air painting spacer for 3mm hardboard, masonite, alumboard — zdjęcie 1
1 / 4

Wet art panel carrier corner, plein air painting spacer for 3mm hardboard, masonite, alumboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corners for carrying art panels after you painted on them. Supports two to four 3mm panels. Parametric.

Ocena
0 / 5
Polubienia
9
Pobrania
167
Wydruki
0
Wyświetlenia
996
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Are you a painter and have to carry wet hardboard, masonite, or alumboard panels home after painting? These corners can be used to carry from two to four wet 3mm panels of 3mm width.

PLA and PETG both work fine. PETG might be better for summer in your car.

Printing:

  • 3 perimeters, 10% gyroid infill, 3 top/bottom layers
  • Weight ~5g, cost $0.10
     

Parametric design and the source Fusion360 file is provided.

These corners are provided entirely on AS IS basis. I assume no responsibility for bad art. 

Now go paint something nice.

Tagi