MK4 - PTFE Tube Holder Top- and Sidearm Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extension arm to hold a PTFE tube with a pneumatic coupler onto the MK4's Z-frame.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 55
- Wydruki
- 2
- Wyświetlenia
- 840
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I'm not using the MK4's filament spool holder but have my spools hanging from a leveraged position or sitting next to the printer, I designed this holder arms to guide the filament inside a PTFE (Teflon) tube to the Nextruder.
These holders are easily printable, can be mirrored to match either side, and are mounted directly to the Z-frame.
You need to replace the inner M3 screw of the Z top end with a 2cm long one.
Make sure that you screw the 3cm long M3 screw through the Z top end and the frame until it is flush with the back of the Z frame before you place the PTFE tube holder into the honeycomb pocket. Then screw the M3 screw all in, thus locking the PTFE tube holder in place.
You'll need a pneumatic coupler, an M3, and an M5 inlay for the holders. In the case of the M5 inlay, it is the small profile version.
All parts are linked via my Affiliate links in the following list. You can support me by buying those parts via those links without additional costs.
Parts and tools used in this project
Additional Support Information
Please consider following me if you like my work:
And if you feel like buying me a coffee to stay productive and creative, you can do so by sending me a tip via Printables or PayPal:
Or feel free to use one of the following affiliate links below - without additional or hidden costs for you, of course!
Generic Affiliate Links
Thank you very much, and happy printing,
Martin