Wookong (non bluetooth) LED holder with clamp to 25mm Tube.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the status LED of the Wookong flight controller (non-BT one) It also work as a tulip for the LED.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a holder fot th status Led of the Wookong (the non-BT one) It also work as a tulip for the LED making easier the reading of the LED from far away, from the sides or below.
The part consists in two pieces. the holder itself and a cap to cover the tulip. The cap (at least in my case) holds itself due to friction with the walls.
It has a hole in the bottom to push the LED out of the holder (with a screwdriver o other tool) without having to pull from the cable. It also has a channel for a ziptie to make the hold to the 25mm tube stronger.
Print preferably in white, transparent could work but have not tested it.
If you think it deserves downloading... Please leave a Like!
Be proud, Show your makes!
EDIT 1/9/15: Added Flat mounting model per request.
Category: R/C Vehicles
