Quest 3 Magnetic Lens Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quest 3 magnetic lens adapter for those who have printed a Quest 2 version from a previous popular print.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 423
- Wydruki
- 0
- Wyświetlenia
- 3330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the quest 3 clip template from: https://www.printables.com/model/612450-quest-3-lens-adapter-template
Took the lens mount from: https://www.thingiverse.com/thing:5319065.
Mashed them together and made the mount for Quest 3, so if you printed the lens holder for Quest 2 for the lens mount above you can just print this to use the same magnetic lens on the Quest 3.
Model is for right eye, mirror it to get the left eye. FYI, I print left and right sets in matching colors so I know which eye is which without having to label anything. Use the same 5x2mm magnets.
Also included is a right lens piece that is modified from the remix source to be a thinner lens piece. If you need to continue using the same lens piece interchangebaly with a Quest 2, I've also included a quest2 right mount that is much taller so the thinner lens piece won't interfere with the quest 2 fresnel lens.
10/24/23: Uploaded 20231024_ProperClipFit.stl. This contains the curved template from the printable remix source and fits much better and less prone to snapping and accidental removal. Recommend sanding the clip side as the layers will not form perfect rings and have noticeable steps. Also adjusted the positioning to closer match the 65mm PD zenni lens.
10/25/23: Uploaded 20231025_AsThinAsItGets.stl. If you have 5x1 mm magnets instead of the 5x2 mm, you can print this one to reduce the thickness even further.