Begode Master Front Handle EUC Front Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for my V1 Master, no idea if it works on other versions or T4/Pro.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 732
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The model is split into 3 pieces to avoid a weak delamination direction direction (makes it super strong). Requires a few bolts, one of which is chambered. I printed it at 0.6mm layer height with 60% infill and it was plenty strong enough to lift the EUC alone. Has 2 little bumps to hold the foam in place, seems my light has broken off and is only held on by the foam. Requires you to cut back the foam where it bolts onto the frame.
You will need to print the 2 of the smaller piece, don't forget to mirror one.
Rear handle here