Vive Tracker Isolation Mount for 40 series Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An isolation mount for the Vive Tracker to be used with VR motion compensation for a sim rig.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a vibration damping mount for a Vive Tracker to be used with motion compensation software.
EDIT: This absolutely will not dampen my D-Box haptics on the race track over a rumble strip or in Rally. It might be suitable for MSFS and smooth flight.
It utilizes Drone anti-vibration shocks that can be found here.
https://www.amazon.com/dp/B07WGPVZM6
There is room for a 1/4x20 by ½" long bolt to secure the Vive tracker.
It uses two M8x16 bolts to secure it to a profile by T-nuts, or threaded holes in the end of the profile. ( Added a spacer for use with M8x55mm bolts if a stand off is needed )
I'm currently using this with the OpenXR-MotionCompensation here.
https://github.com/BuzzteeBear/OpenXR-MotionCompensation
I have to give credit to Bjorn who created the initial files I started from. His solution is not currently published.